Comparative mineral and biochemical characterization of Citrus reticulata fruits and leaves to citrus canker pathogens, Xanthomonas axonopodis.

Pakistan's economy greatly benefits from citrus production since these fruits are sold and consumed all over the world. Although citrus fruits are easy to cultivate, they are susceptible to diseases caused by bacteria, viruses, and fungi. These challenges, as well as difficulties in obtaining the proper nutrients, might negatively impact fruit yields and quality. Citrus canker is another complicated problem caused by the germ Xanthomonas axonopodis. This germ affects many types of citrus fruits all over the world. This study looked closely at how citrus canker affects the leaves and the quality of the fruit in places like Sargodha, Bhalwal, Kotmomin, and Silanwali, which are big areas for growing citrus in the Sargodha district. What we found was that plants without the disease had more chlorophyll in their leaves compared to the sick plants. Also, the healthy plants had better amounts of important minerals like calcium, magnesium, potassium, and phosphorus in their fruits. But the fruits with the disease had too much sodium, and the iron levels were a bit different. The fruits with the disease also didn't have as much of something that protects them called antioxidants, which made them more likely to get sick. This study helps us understand how citrus canker affects plants and fruit, so we can think of ways to deal with it.

Agaricus subgenus Pseudochitonia in Malakand, Pakistan: An updated phylogeny and description of three new species.

Agaricus is a genus with more than 500 species. Most of the new species reported since 2000 are tropical or subtropical. The study area, the Malakand region, located in the north of Pakistan, has a subtropical climate. In this study, nine species, including three new species, of Agaricus subgenus Pseudochitonia, are reported from this region. Description of the new species are based on morphological characteristics and phylogenetic analyses using three DNA regions: nuc ribosomal DNA internal transcribed spacers (ITS), fragments of the large subunit of nuc ribosomal DNA (28S), and the translation elongation factor 1-alpha gene (TEF1). One new species, Agaricus lanosus, with wooly squamules on its cap, forms a lineage within Agaricus sect. Bivelares and cannot be classified with certainty in one of the two subsections (Cupressorum and Hortenses) of this section. Agaricus rhizoideus with rhizoid-like structure at the base of the stipe forms a basal clade in Agaricus sect. Hondenses. Specimens of the third new species, Agaricus malakandensis, form a species-level clade within Agaricus sect. Catenulati and exhibits the morphological characteristics of this section. Due to their similar ITS sequences, two previously unnamed specimens from Thailand (A. sp. LD2012162 and CA799) are considered conspecific with A. malakandensis.

A comparative analysis of the vibrational behavior of various beam models with different foundation designs.

This article discusses the modal behavior of elastically constrained beams under various types of foundations and provides insights into the effects of different factors on the eigenfrequencies of beams. Numerical and analytical techniques, specifically the Galerkin finite element method (GFM) and the separation of variables, are utilized to determine the eigenfrequencies and mode shapes of beams. Modal analysis of Timoshenko, shear, Rayleigh, and Euler-Bernoulli beams that are elastically constrained and resting on Winkler, Pasternak, and Hetényi foundations, considering non-classical boundary conditions, is included in the study. The effects of factors such as flexural rigidity, transverse modulus, and Winkler foundation constant on natural frequencies of different beam models are investigated. The proposed method efficiently converges to the exact solution without shear locking in the stiffness element. The results demonstrate that the natural frequencies of the beam rise because of the shear layer, flexural rigidity, and foundation constant. Furthermore, the Hetényi elastic foundation affects the natural frequency of the beam, depending on the relative values of beam stiffness and foundation stiffness. Additionally, incorporating both shear deformation and rotary inertia has a greater impact on the eigenfrequencies of Euler-Bernoulli beams compared to incorporating only one of these effects. The findings of this work provide valuable insights into the behavior of beams under different foundation conditions and have potential applications in the design and optimization of structures incorporating beams, thereby enhancing the understanding of beam analysis.

Investigating the Impact of Carbon Nanotube Nanoparticle Exposure on Testicular Oxidative Stress and Histopathological Changes in Swiss albino Mice.

Carbon nanotubes (CNTs) possess remarkable properties that make them valuable for various industrial applications. However, concerns have arisen regarding their potential adverse health effects, particularly in occupational settings. The main aim of this research was to examine the effects of short-term exposure to multiwalled carbon nanotube nanoparticles (MWCNT-NPs) on testicular oxidative stress in Swiss albino mice, taking into account various factors such as dosage, duration of exposure, and particle size of MWCNT-NP. In this study, 20 mice were used and placed into six different groups randomly. Four of these groups comprised four repetitions each, while the two groups served as the vehicle control with two repetitions each. The experimental groups received MWCNT-NP treatment, whereas the control group remained untreated. The mice in the experimental groups were exposed to MWCNT-NP for either 7 days or 14 days. Through oral administration, the MWCNT-NP solution was introduced at two distinct dosages: 0.45 and 0.90 µg, whereas the control group was subjected to distilled water rather than the MWCNT-NP solution. The investigation evaluated primary oxidative balance indicators-glutathione (GSH) and glutathione disulfide (GSSG)-in response to MWCNT-NP exposure. Significantly, a noticeable reduction in GSH levels and a concurrent increase in GSSG concentrations were observed in comparison to the control group. To better understand and explore the assessment of the redox status, the Nernst equation was used to calculate the redox potential. Intriguingly, the calculated redox potential exhibited a negative value, signifying an imbalance in the oxidative state in the testes. These findings suggest that short-term exposure to MWCNT-NP can lead to the initiation of testicular oxidative stress and may disrupt the male reproductive system. This is evident from the alterations observed in the levels of GSH and GSSG, as well as the negative redox potential. The research offers significant insights into the reproductive effects of exposure to MWCNTs and emphasizes the necessity of assessing oxidative stress in nanomaterial toxicity studies.

Evaluation of antibacterial, antifungal and antibiofilm activities of A. baumannii-derived tannase and gallic acid against uropathogenic microorganisms.

One of the most prevalent infectious diseases and a key driver of antibiotic prescriptions in pediatrics is urinary tract infection (UTI). Due to the emergence of more resistant uropathogenic bacterial and fungal strains, current treatments are no longer effective, necessitating the urgent development of novel antibacterial and antifungal drugs. In this study, the antifungal, antibacterial, and anti-biofilm capabilities of compounds, such as tannase (TN) and gallic acid (GA), which were produced from a novel natural source, Acinetobacter baumannii (AB11) bacteria, were assessed for the inactivation of uropathogenic microorganisms (UMs). Ammonium sulphate precipitation, ion exchange, high-performance liquid chromatography, and gel filtration were used to purify TN and GA that were isolated from A. baumannii. A 43.08 % pure TN with 1221.2 U/mg specific activity and 10.51 mg/mL GA was obtained. The antibacterial, antifungal and anti-biofilm activities of TN and GA were evaluated against UMs and compared to those of commercially available antibiotics including sulfamethoxazole (SXT), levofloxacin (LEV), ciprofloxacin (CIP), amikacin (Ak), and nitrofurantoin (F). The results showed that TN and GA were superior to commercial antibiotics in their ability to inactivate UMs and considerably reduced biofilms formation. Additionally, the GA emerges as the top substitute for currently available medications, demonstrating superior antibacterial and antibiofilm properties against all UMs evaluated in this study. The results of this investigation showed that A. baumannii-derived TN and GA could be utilized as an alternative medication to treat UTIs.

Physico- and phytochemical properties of Brassica juncea as affected by agroclimatic conditions.

Physicochemical and phytochemical assessment of leaf mustard (Brassica juncea L.) grown in different agroclimatic conditions is essential to highlight their compositional variability and evaluate the most suitable bunch of agroclimatic and agronomic practices. B. juncea is one of the important leafy vegetables that serve as source of vitamin A and C and iron, and plenty of antioxidants. This in situ research was executed to assess the quality variability of B. juncea grown in different agroecosystems. Leaves' samples of B. juncea were procured from 15 farmers' fields exhibiting different agroclimatic conditions i.e., elevation, nutrient management, temperature, irrigation, and tillage practices. Leaves' samples were subjected to physicochemical and phytochemical analysis, i.e., moisture, pH, TSS, ascorbic acid, carotenoids, phenolics, flavonoids, and antioxidant potential. In the leaves' samples of B. juncea, the target properties were found to vary significantly (P ≤ 0.05) in different agroclimatic conditions. The moisture content, ascorbic acid, phenolic content, carotenoids, and antioxidants were found in the range of 62.7-79.3%, 74-91 mg/100 g, 49.2-49.2 mg GAE/100 g, 436.3-480 mg ß carotene/100 g, 32.7-46.67%, respectively. This study elaborates the significant variation of physicochemical and phytochemical attributes of B. juncea due to the prevailing agroclimatic conditions. This necessitates the appropriate choice of B. juncea concerning its composition and ecological conditions of its cultivation in the prospective health benefits.

Polarization-insensitive tunable multifocal liquid crystal microlens array with dual lens modes.

Microlens has significant applications in integrated micro-optical systems. Recently, multifocal microlens arrays are expected to extend the depth of field for imaging systems and realize a highly efficient laser beam homogenizer. This work presents what we believe to be a novel approach for developing a tunable multifocal liquid crystal microlens array (TMLCMA), which can be operated in convex and concave modes through voltage control schemes. The TMLCMA is manufactured using nematic liquid crystals (LCs) with negative dielectric anisotropy, in conjunction with a triple-electrode structure consisting of top large-hole, middle small-hole array, and bottom planar electrodes. When a voltage is applied, the axially symmetric fringing electric field induced by the large-hole electrode causes the focal length of the microlens to gradually and radially change from the TMLCMA border toward the center. The gradient in the change of focal length is electrically tunable. The calculated spatial potential distributions qualitatively explain the multifocal characteristic and dual lens modes of the TMLCMA. The LC molecules in each microlens are reoriented in an axially symmetrical form, resulting in a polarization-insensitive TMLCMA. The imaging functions of the TMLCMA operated with dual lens modes are shown through practical demonstrations. The simple fabrication and versatile function make the developed TMLCMA highly promising for various optical system applications.

Efficient treatment of tannery wastewater through aeration, coagulation, and algal pond.

BACKGROUND: Tannery wastewater effluents contain many toxic and carcinogenic heavy metals and physiochemical parameters that need to be removed before these effluents enter in the main water bodies or rivers. In this study, the effluents from the tannery industry are treated through aeration, coagulation, and Chlorella vulgaris pond treatment processes for the removal of physiochemical: parameters only. METHODS: The effect of removal efficiencies (%) was studied on the physicochemical parameters, including salinity, electrical conductivity (EC), total dissolved solids (TDS), turbidity, total suspended solids (TSS), biochemical oxygen demand (BOD), and chemical oxygen demand (COD). RESULTS: The key results showed that the removal of EC, TDS, turbidity, TSS, BOD, and COD was 80.2%, 67%, 81%, 80.8%, 68.6%, and 100%, respectively, in raw wastewater treatment having 25, 50, and 70 g of algae C. vulgaris doses. The removal efficiencies (%) of salinity, EC, TDS, turbidity, TSS, BOD, and COD were 83%, 87.1%, 77.1%, 80%, 40%, 97%, and 98%, respectively, during coagulated wastewater treatment with three doses of algae. The observed improvement in treated wastewater indicated that the removal efficiencies (%) of salinity, EC, TDS, turbidity, TSS, BOD, and COD were 85.7%, 39.3%, 81.3%, 67.8%, 50.3%, 97%, and 98%, with C. vulgaris. CONCLUSION: This study confirmed that the treatment of tannery wastewater by these processes increased the pollutant removal efficiencies as all the physiochemical parameters were exceeding the permissible limits. RESULTS CONTRIBUTION IN FUTURE: This research will be helpful to treat the industrial wastewaters or effluents before it further mixes up in the main water streams. In this way, water quality will be better, aquatic life will be saved, and further researchers can analyze more ways for efficient treatments as they have a baseline data through this study findings. PRACTITIONER POINTS: One of the most pollutant sources in terms of both physical and chemical parameters is the produced wastewater from tannery industries. The effluents from tannery industry are treated through aeration, coagulation, and algae ponds treatment processes. These treatment made the tannery wastewater as environmental friendly.

Green synthesis and characterization of silver and copper nanoparticles and their use as an effective adsorbent for chromium removal and recovery from wastewater.

Chromium (Cr) is one of the hazardous heavy metals that is naturally carcinogenic and causes various health problems. Metallic nanoparticles such as silver and copper nanoparticles (Ag NPs and Cu NPs) have gained great attention because of their unique chemical, physical, and biological attributes, serving diverse and significant role in various useful and sustainable applications. In the present study, both of these NPs were synthesized by green method in which Azadirachta indica plant extract was used. These nanoparticles were characterized by using advanced instrumental techniques such as Fourier transmission infrared (FTIR), X-ray diffraction (XRD), scanning electron microscope attached with energy-dispersive spectroscopy (SEM-EDS), and elemental mapping. These environmentally friendly nanoparticles were utilized for the batch removal of Cr from the wastewater. For analysis of adsorption behaviour, a range of kinetic isotherm models (Freundlich, Temkin, Dubinin, and Langmuir) and kinetic models (pseudo-first-order and pseudo-second-order) were used for the Cu-NPs and Ag-NPs. Cu NPs exhibited the highest Cr removal efficiency (96%) within a contact time of 10-15 min, closely followed by Ag NPs which achieved a removal efficiency of 94% under the similar conditions. These optimal outcomes were observed at a sorbent dose of 0.5 g/L for Ag NPs and 0.7 g/L for Cu NPs. After effectively capturing Cr using these nanoparticles, the sorbates were examined through SEM-EDX analysis to observe how much Cr metal was attached to the nanoparticles, potentially for future use. The analysis found that Ag-NPs captured 18% of Cr, while Cu-NPs captured 12% from the aqueous solution. More precise experimental conditions are needed for higher Cr removal from wastewater and determination of the best conditions for industrial-level Cr reuse. Although nanomaterial exhibit high efficiency and selectivity for Cr removal and recovery from wastewater, more research is necessary to optimize their synthesis and performance for industrial-scale applications and develop efficient methods for Cr removal and recovery.

Green Synthesis of ZnO and Black TiO2 Materials and Their Application in Photodegradation of Organic Pollutants.

ZnO and black TiO2 have been selected as the most efficient materials for organic pollution abatement due to their increased efficiency when compared to other materials. However, the concept of green chemistry makes it desirable to design green synthesis approaches for their production. In this study, black TiO2 was synthesized using an environmentally safe synthetic technique with glycerol as a reductant. ZnO was prepared by using ionic-liquid-based microwave-assisted extracts of Polygonum minus. To investigate the materials' potential to photodegrade organic pollutants, methylene blue (MB) and phenol were chosen as model organic pollutants. Both materials were found to exhibit spherical morphologies and a mesoporous structure and were efficient absorbers of visible light. ZnO exhibited electron-hole pair recombination lower than that of black TiO2. Black TiO2 was discovered to be an anatase phase, whereas ZnO was found to have a hexagonal wurtzite structure. In contrast to black TiO2, which had a surface area of 239.99 m2/g and a particle size of 28 nm, ZnO had a surface area of 353.11 m2/g and a particle size of 32 nm. With a degradation time of 60 min, ZnO was able to eliminate 97.50% of the 40 mg/L MB. Black TiO2, on the other hand, could reduce 90.0% of the same amount of MB in 60 min. When tested for phenol degradation, ZnO and black TiO2 activities were reduced by nearly 15 and 25%, respectively. A detailed examination of both ZnO and black TiO2 materials revealed that ZnO has more potential and versatility for the degradation of organic pollutants under visible light irradiation.

Pressure-dependent physical properties of cesium-niobium oxide: a comprehensive study.

Perovskites, an important class of materials, are mostly utilized in memory and spintronic devices. The thermoelectric response calculations for some perovskite oxides have been reported, but their attributes under pressure have rarely been explored. In this current study, the effects of high pressure on various properties of CsNbO3 perovskite oxides in the cubic phase were investigated using the pseudopotential approach and Boltzmann transport theory. Specifically, the structural electronic dispersion relations, density of states, phonon properties, elasto-mechanical properties, optical constants, and thermoelectric performance of the material were analyzed. CsNbO3 was reported to be dynamically stable through the optimization of energy against volume under ambient pressure conditions. The phonon dispersion curves of CsNbO3 were computed at pressures ranging from 60 to 100 GPa to demonstrate its stability under these pressures. At ambient pressure, CsNbO3 is a semiconductor with a wide direct band gap of 1.95 eV. With the increase in pressure, the band gap starts decreasing. An analysis of the imaginary part of the dielectric constant suggests that this material may be useful for sensors and optoelectronic devices. Various thermoelectric response parameters were tested for CsNbO3 at temperatures from 50 K to 800 K, with a step size of 50 K, and pressures of 60-100 GPa. Based on the calculated power factor values and optical parameters, CsNbO3 proved to be a potential candidate for energy harvesting applications.

Innovation modeling and simulation of thermal convective on cross nanofluid flow over exponentially stretchable surface.

This work reported to investigate convective flow of non-Newtonian fluid effect on an exponentially stretchable surface. Effect of nanoparticle is considered in heat and mass equation. The transformation technique utilized on dimensionless equations is converted to non-dimensionless equations are solved thought numerical approach Bvp4c. Influence of approatiate analysis of velocities, heat and mass transport are scrutinized through figures. Furthermore, the comparative analysis of drag forces, Nusselt number and Sherwood number are evaluated over and done with tabulated values. It is give details that the temperature field strengthens with intensification in thermophoresis and random diffusions. Similarly, rises in thermophoresis effect parameter both temperature and concentration profile increasing.

Environmental implication and cancer risk assessment of residual pollutants in cotton crop: a case study of Multan District, Pakistan.

Pakistan is the fourth largest yarn producer in the world heavily that relies on cotton crop which receives a substantial 62% of all pesticide applications. The present study was conducted to quantify the levels of pesticides such as bifenthrin, spirotetramat, pyriproxyfen, imidacloprid, and diafenthiuron in soil and plants residue at selected cotton fields of Multan District, Pakistan. In addition to pesticides, the assessment of heavy metal concentration was also conducted in order to determine the overall risks that these compounds to both plants and human population. For this analysis, 20 soil samples and 10 plant samples were collected from 10 selected cotton fields. Pesticides and heavy metals in soil and plant samples were analyzed using high-performance liquid chromatography (HPLC) and Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES), respectively. It was observed that all samples collected from selected fields contained pesticide residue in top soil (0-15 cm). However, no pesticides were detected in the lower soil layer (16-30 cm). In case of heavy metals, the highest concentration of Fe, Pb, and Mn was observed in both soil and plant residue samples. The heavy metals were found in the order of Fe > Mn > Pb > Zn > Cu > Cd in the soil. The total carcinogenic risk values for a few pesticides were found to range from 10-6 to 10-2, indicating that residents of the study area have low to higher chances of developing cancer. A positive correlation was observed among the pesticides (r = 0.18-0.95) as well as in metals related parameters (r = 0.49-0.96), where a weak negative correlation was found among metal to pesticide parameters except Pd where the maximum r value was 0.62. In general, the finding of this study encourages the development and adoption of sustainable agricultural practices that lower the dependence on toxic pesticides and endorse environmentally friendly alternatives.

Effect of green synthesized cerium oxide nanoparticles on fungal disease of wheat plants: A field study.

Recently, there has been considerable attention towards the production of environmentally friendly nanoparticles (NPs). In this investigation, the successful synthesis of cerium oxide nanoparticles (CeO2 NPs) was achieved by employing an eco-friendly technique that utilized an extract from the leaves of local plant quinoa (Chenopodium quinoa L.). The synthesized CeO2 NPs were subjected to characterization using state-of-the-art methods. The prepared CeO2 NPs contained a round shape with clusters and have a size of 7-10 nm. To assess how effective CeO2 NPs derived from C. quinoa were against Ustilago tritici, a fungal disease that negatively affects wheat crop globally, a study was performed on two varieties of wheat crop comprised of Arooj (V1) and Akber (V2), cultivated under field conditions. CeO2 NPs were applied foliarly twice to the wheat crop at four different concentrations: T0 (0 mg/L), T1 (50 mg/L), T2 (75 mg/L), and T3 (100 mg/L). The results revealed that the control group (T0) exhibited the highest disease severity index (DSI) with a value of 75% compared to the other concentrations of CeO2 NPs on both varieties. At a concentration of 100 mg/L of CeO2 NPs, the DSI dropped to a minimum of 35% and 37% on both V1 and V2 respectively. These findings indicated that an increase in the concentration of CeO2 NPs has a beneficial impact on disease severity. Similar patterns have also been observed with disease incidence (DI), with the greatest efficacy observed at a concentration of 100 mg/L of CeO2 NPs. Our investigation has shown that CeO2 NPs exhibitd significant antifungal potential against U. tritici which may be a promising strategy to mitigate fungal disease and crop losses globally.

Effects of Poultry Manure on the Growth, Physiology, Yield, and Yield-Related Traits of Maize Varieties.

Industries play a significant role in the improvement of lifestyle and in the development of a country. However, the byproducts from these industries are a source of environmental pollution. The proper use of the byproducts of these industries can help to cope with environmental pollution. Some byproducts have high nutritional content and are good for crop plants. The purpose of this research was to investigate the effect of different rates of poultry manure on the soil chemical properties, growth, and yield of maize. A pot experiment was conducted in the botanical garden of the Department of Botany, University of Sargodha, Pakistan to investigate the effect of various treatments of poultry manure (0, 25, 50, 75, and 100 g/pot) on the morphological, physiological, and yield attributes of two maize varieties, Pearl and MMRI. Treatment T1 was a mixture of soil and 75 g/pot poultry manure, T2 was a mixture of soil and 50 g/pot poultry manure, T3 was a mixture of soil and 25 g/pot poultry manure, and T4 was 100 g/pot poultry manure. Soil without any industrial byproduct (100% soil only) was used as the control (T0). The results revealed that the use of poultry manure enhanced the physical properties of the soil. Available P and soil organic matter were improved in soil amended with poultry manure. It is evident from the results that the vegetative growth of both maize varieties was significantly enhanced by growing in soil amended with poultry manure as compared to their respective control. Similar responses were also recorded for the physiological attributes of leaf area, photosynthetic rate, transpiration rate, stomatal conductance, and water use efficiency of both varieties. Yield and yield-contributing traits of both maize varieties were significantly improved by growing plants in soil amended with 50 and 75 g/pot of poultry manure. It is also inferred that the use of 50 g/pot poultry manure in soil amendment is an eco-friendly and economically effective option for maize growers of arid and semiarid regions to enhance the kernel yield and profit per annum. Poultry manure could be useful to ameliorate the adverse effects of salinity stress on all parameters, particularly the grain yield. Furthermore, this would be a useful and economical method for the safe disposal of byproducts.

Water Quality Index and Human Health Risk Assessment of Drinking Water in Selected Urban Areas of a Mega City.

The present study was conducted to evaluate the quality of drinking water and assess the potential health hazards due to water contaminants in selected urban areas of Lahore, Pakistan. Water samples were collected from ten sites and analyzed for different physico-chemical parameters including turbidity, color, pH, total dissolved solids (TDS), nitrates, fluoride, residual chlorine, and total hardness. Additionally, heavy metal (arsenic) and microbial parameters (E. coli) were also determined in the water samples. Drinking water quality evaluation indices, including the water quality index (WQI) for physico-chemical and biological parameters and human health risk assessment (HHRA) for heavy metal were estimated using the analytical results of the target parameters. It was found in most of the areas that the levels of arsenic, fluoride, TDS, and residual chlorine were higher than those recommended by the National Environmental Quality Standard (NEQS) and World Health Organization (WHO) guidelines. In addition to the physico-chemical parameters, microbial content (E. coli) was also found in the drinking water samples of the selected areas. Statistical analysis of the results indicated that levels of target parameters in drinking water samples are significantly different between sampling sites. The WQI for all physico-chemical and microbial parameters indicated that drinking water in most of the areas was unfit and unsuitable (WQI > 100) for drinking purposes except for the water of Bhatti Gate and Chota Gaon Shahdara with a WQI of 87 and 91, respectively. Drinking water in these areas had a very poor WQI rating. According to HHRA, drinking water from the selected sites was found to be of high risk to children and adults. The carcinogenic risk of arsenic indicated that all samples were of high risk to both adults and children (4.60 and 4.37 × 10-3, respectively). Regular monitoring of drinking water quality is essential, and proactive measures must be implemented to ensure the treatment and availability of safe drinking water in urban areas.

Enhancing chromium removal and recovery from industrial wastewater using sustainable and efficient nanomaterial: A review.

Water contamination can be detrimental to the human health due to higher concentration of carcinogenic heavy metals such as chromium (Cr) in the wastewater. Many traditional methods are being employed in wastewater treatment plants for Cr removal to control the environmental impacts. Such methods include ion exchange, coagulation, membrane filtration, and chemical precipitation and microbial degradation. Recent advances in materials science and green chemistry have led to the development of nanomaterial that possess high specific surface areas and multiple functions, making them suitable for removing metals such as Cr from wastewater. Literature shows that the most efficient, effective, clean, and long-lasting approach for removing heavy metals from wastewater involves adsorbing heavy metals onto the surface of nanomaterial. This review assesses the removal methods of Cr from wastewater, advantages and disadvantages of using nanomaterial to remove Cr from wastewater and potential negative impacts on human health. The latest trends and developments in Cr removal strategies using nanomaterial adsorption are also explored in the present review.

Optimized photodegradation of palm oil agroindustry waste effluent using multivalent manganese-modified black titanium dioxide.

This article presents a methodological approach to use manganese (Mn3+Mn7+)-modified black titanium dioxide (Mn/BTiO2) as a photocatalyst to optimize and improve visible-light-driven photodegradation of treated agro-industrial effluent (TPOME). A modified wet chemical process was used to prepare BTiO2. The BTiO2 was then wet impregnated with Mn and calcined at 300 °C for 1 h to produce Mn/BTiO2. The activity of Mn/BTiO2 was investigated in terms of photo-assisted elimination of chemical oxygen demand (COD), phenolic compounds (PCs), color, and total organic carbon (TOC). Using the design of experiments (DOE), the conditions of the photocatalytic process, including photocatalyst loading, Mn concentration, hydrogen peroxide (H2O2) dose, and irradiation time, were optimized. Under the optimum conditions (0.85 g/L photocatalyst loading, 0.048 mol/L H2O2 dose, 0.301 wt.% Mn concentration, and 204 min irradiation time) COD, PCs, color, and TOC removal efficiencies of 88.87%, 86.04%, 62.8%, and 84.66%, respectively, were obtained. Statistical analysis showed that the response variable's removal from TPOME estimation had high R2 and low RMSE, MSE, MAD, MAE, and MAPE values, indicating high reliability. This study demonstrated the significant potential of the developed photocatalytic system for the treatment of waste effluent generated by the palm oil industry and other agro-industries, with the ability to simultaneously reduce a number of organic pollution indicators (OPIs).

The effect of gibberellic acid on wheat growth and nutrient uptake under combined stress of cerium, zinc and titanium dioxide nanoparticles.

Nanoparticles (NPs) are released and dispersed in the environment because of increased manufacturing and use of nano products. NPs disturb the growth of plants depending upon types, exposure duration and plant species. The purpose of this research was to explore the role of gibberellic acid (GA) exposure through foliar route on wheat growth under alone or combined soil application of cerium oxide (CeO2), zinc oxide (ZnO), and titanium dioxide (TiO2) NPs. GA was foliar-applied (200 mg/L) on the wheat plants treated with individual and in all possible combination of the selected NPs. Explorations have revealed that the combination of NPs and GA worked well to enhance the plant growth and selected nutrient status than NPs alone. Furthermore, GA decreased the boosted antioxidant enzyme activities under the combination and individual NPs compared to the alone NPs treated plants, lowered the oxidative stress in wheat plants which provided the additional proof that GA decreased oxidative damage in plants. Combined NPs showed differential effects than individual NPs application irrespective of GA exposure which varied with NPs combination and studied parameters of plants. GA + NPs differentially affected the potassium, phosphorus, iron and manganese concentrations in wheat tissues than NPs alone treatments. Overall, GA can be applied when there is excess of NPs (either alone or in combination) in the growth medium to ensure the growth of crops. However, further studied are needed with other plant species and alone or combined use of different NPs under GA treatment before any final recommendation.